Wholesale hand tools — spanners, pliers, hammers
Combination spanner sets, socket sets in 1/4", 1/2" and 3/4" drive, ratchets, hex and Torx keys, pliers, wire strippers, claw, club and dead blow hammers, mallets, sledgehammers and hacksaws. Buy them at the supplier minimum or under your own brand, on blister cards, racks or in cases.
Most hand tools sell all year, so they are the backbone of a hardware wholesale order. For every model we state the steel the manufacturer declares, such as CrV, CrMo or 45# carbon steel, and before you order we tell you which documents the supplier can show for that exact item.
64 products in this category
Supplier minimum and an indicative net “from” price on every card. Open a product for sizes, steel grade, packaging and branding options.
Hacksaw Frame 12" (300 mm), 18 or 24 TPI Blade
from €3.59 net
CrV Combination Spanner Set 12–25 pcs, 8–32 mm, in Roll Pouch
from €28.75 net
Combination Spanner Set 21 pcs, 6–32 mm, CrV Steel, in Tray
from €80.62 net
Combination Spanner Set 13 pcs, 8–24 mm, CrV Steel, Roll-Up Bag
from €57.50 net
Socket and Spanner Set 37 pcs with Ratchet, in Case
from €52.38 net
L-Key Set 9 pcs: Ball-End Hex or Torx, Colour-Coded
from €0.43 net
Ball-End L-Key Set 9 pcs, Colour-Coded, CrV
from €11.93 net
Hex Key Set 31 pcs, Metric and Inch, in Case
from €9.83 net
T-Handle Hex Key Set 10 pcs, 2–10 mm, with Stand
from €8.63 net
Ratchet Handle with Rubber Grip for Car Workshops
from €11.50 net
Straight Slogging Ring Spanner, 21–125 mm, Black Phosphate
from €5.15 net
Slogging Spanner, Ring 17 mm or Open End 22 mm, Black Oxide
from €11.21 net
12-Point Slogging Ring Spanner, 30–50 mm, Carbon Steel
from €10.41 net
Impact Socket Set 1/2" 35 pcs in Metal Case
from €74.75 net
11-Piece 1/2" Set: 3-in-1 Ratchet Wrench and 10 Sockets
from €35.65 net
CrMo Impact Socket Sets 1/2", 6–50 pcs, in Case or on Rail
from €14.98 net
Deep Impact Socket Set 1/2" 35 pcs, CrV Steel, Metal Case
from €65.78 net
Mini Long Nose Pliers 115 mm with Dipped Handles, Blister
from €3.02 net
Long Nose Pliers 6″/8″, CR-V Steel, Two-Component Handles
from €5.92 net
Combination Pliers 160/180/200 mm, Soft Grip, Blister Card
from €6.38 net
C-Clamp Locking Pliers 6″–18″ for Welding, Nickel-Plated
from €6.33 net
Swedish-Type Pipe Wrench 45°, 1″ / 1.5″ / 2″, 45# Steel
from €13.94 net
Locking Pliers Set 5 pcs in Plastic Case, High-Carbon Steel
from €31.63 net
Pliers Set 3 pcs: Diagonal Cutter, Combination and Long Nose
from €16.91 net
6″ Pliers Set 3 pcs: Combination, Long Nose and Diagonal
from €11.47 net
Roofing Claw Hammer 10 oz with Fibreglass Handle
from €15.24 net
British-Type Claw Hammer with Fibreglass Handle
from €7.88 net
Claw Hammer 8–20 oz with Fibreglass Handle, CE / GS
from €4.37 net
Claw Hammer 700 g, Steel 45, Fibreglass Handle with TPR/PVC Grip
from €6.38 net
Rubber Mallet 360–915 g with Fibreglass Handle for Flooring
from €8.63 net
Octagonal Sledgehammer 5 kg, Forged 45# Steel, 900 mm Fibreglass Handle
from €27.37 net
Claw Hammer 8–16 oz, 45# Steel, Ergonomic Fibreglass Handle
from €7.48 net
Ball Peen Hammer 1–2 lb with Fibreglass Handle
from €4.97 net
Mini Claw Hammer 8 oz with Rubber Grip for Home Use
from €1.93 net
Orange Dead Blow Rubber Hammer 1 lb, One-Piece
from €9.23 net
Body Repair Tap-Down Hammer with 15 Interchangeable Heads
from €27.63 net
Geological Hammer, High-Carbon Steel, One-Piece, 1 kg
from €20.13 net
Combination Spanner Set 12 pcs, 8–19 mm, CrV Steel, on Rack
from €20.99 net
Socket Set 94 Pieces, 1/4" and 1/2", with Ratchets, in Case
from €119.86 net
Compact 1/4" Socket and Bit Set, 38 Pieces, with Ratchet, in Case
from €22.94 net
Impact Socket Set 3/4", 26 Pieces, 21–65 mm, Cr-Mo Steel, Case
from €123.34 net
Ratchet Handle 1/4", 3/8" or 1/2", CrV Steel, Two-Component Grip
from €8.42 net
Universal Ratchet Wrench 6–22 mm, 200 mm, Cr-Mo Steel
from €26.22 net
Aluminium Pipe Wrench, Sizes from 8″ to 48″
from €6.61 net
Ratcheting Combination Wrench 10 mm, CrV Steel, Mirror Chrome
from €3.62 net
72-Tooth Ratchet 1/4", 3/8" or 1/2", Quick Reverse
from €15.21 net
Electronics Diagonal Cutter 125 mm, CrV Steel, Soft Grips
from €5.75 net
Mini Flush Cutter 170II for Thin Wire and Plastic, 6 Colours
from €1.29 net
Diagonal Cutting Pliers 160 or 180 mm, CrV Steel, Two-Component Grips
from €6.96 net
Wire Stripper 7″ with Cutter, 45# or 50# Steel
from €3.74 net
Multi-Function Electrician Pliers 217 mm: Strip, Cut, Crimp
from €3.45 net
21-in-1 Stainless Steel Wire Stripper Pliers, 190 mm
from €11.50 net
Self-Adjusting Wire Stripper with Cutter, 175 mm
from €7.19 net
Water Pump Pliers 250 mm, Two-Component Grips
from €8.86 net
Quick-Adjust Water Pump Pliers 10″, TPR Grips
from €11.50 net
3-Piece Pliers Set: Combination, Diagonal, Long Nose, CrV Steel
from €15.38 net
Soft-Face Mallet with Replaceable Heads, 25–45 mm
from €2.04 net
Club Hammer 2 or 4 lb with Fibreglass Handle
from €10.87 net
Club Hammer with Oak Handle 2, 3 or 4 lb, Hardened Steel
from €8.57 net
Heavy Sledgehammer 9 kg (20 lb) with Anti-Vibration Fibreglass Handle
from €57.50 net
Mini Ball Pein Hammer 100 g with Wooden Handle
from €3.31 net
Stubby Claw Hammer 11.6 oz (≈ 330 g), Forged Steel
from €1.61 net
Dead Blow Hammer 0.5 to 4 lb, Orange, Soft Face
from €5.95 net
Dead Blow Hammer 640 g, PVC, Ø 48 mm Head, 306 mm Long
from €10.87 net
Buying guide
In hand tools wholesale, goods are bought on trust: a customer picks up a spanner set or a pair of pliers and judges the finish, the fit and the grip in seconds. A low unit price means little until you know the steel, the heat treatment, the size accuracy and the handle material. As a hand tool supplier we work with partner factories on factory-direct terms, but we are an importer, not a tool manufacturer: what you get from us is the sourcing, the inspection and the EU paperwork around the product.
What is in the range
Combination spanner sets from 6 to 32 mm in CrV steel, in roll pouches, trays or on racks; ratcheting spanners; slogging ring spanners from 17 to 125 mm; socket sets from 37 to 94 pieces with ratchets, and impact socket sets in 1/2" and 3/4" drive in CrMo steel, including deep sockets up to 65 mm; 72-tooth and two-component ratchet handles; ball-end hex and Torx L-key sets and T-handle hex keys; combination, long nose, diagonal, locking and water pump pliers, flush cutters and electrician pliers; wire strippers from 7″ to 21-in-1; claw hammers from 8 to 20 oz with fibreglass handles, club hammers with fibreglass or oak handles, ball pein, dead blow and rubber mallets, sledgehammers up to 9 kg; Swedish-type and aluminium pipe wrenches; 12″ hacksaw frames.
What we ask for
Steel grade and finish (chrome plating, black oxide or phosphate), size range per set, drive size, hardness where the supplier states it, head weight for hammers, handle material and the packaging format. On a sample we check size accuracy on fasteners, the ratchet action, jaw alignment on pliers and how firmly hammer heads sit. Handles and grips in rubber or plastic must meet REACH limits for PAHs, and PVC dips must respect the limits on phthalates and lead, so we ask the manufacturer for the material data. A plain hand tool falls under the GPSR rather than a CE directive: we do not print CE or national marks such as GS on hand tools unless a report exists for that model.
Insulated and specialist tools
Insulated pliers and tools for live electrical work need test data to EN IEC 60900 from the manufacturer; they are not in the catalogue and are sourced only where that report exists. Automotive sets, body-repair hammers and other specialist tools can be sourced on request: send a photo or link and we quote them like any other product.
Private label options
Logo on the tool
Your brand laser-engraved or stamped on spanners and sockets, printed on pliers handles or moulded into the hammer grip where the model allows it.
Retail packaging
Blister cards with hang tabs, printed cases, roll pouches or wall racks with barcode, size list and safety notes in your languages.
Colours and specification
Your handle colours, set composition, steel grade or finish, agreed with the factory and fixed in a pre-production sample.
Checklist before you order
- Ask for the steel grade per item, not one line for the whole set, and check whether “CrV” covers sockets and spanners alike
- Check the size list of a set against the photo: some suppliers count bits or adaptors as pieces
- Test sockets and spanners on real nuts and bolts, and the ratchet under load
- Ask for REACH data on grips and handles, especially soft PVC and rubber
- Compare carton weight as well as unit price: heavy sets and sledgehammers change the delivered cost
- Place own-brand orders by October–November if the tools are part of a spring promotion
Frequently asked questions
What is the minimum order for wholesale hand tools?
Supplier minimums in the catalogue run from a single set to 1000 pieces depending on the model. Tools with your logo or own packaging typically start at about 300 pieces per model; sizes within one series can often be combined, which we confirm per factory.
Are you a hand tool manufacturer?
No. We are an EU importer. The tools are made by partner factories; we check the factory before ordering, inspect the goods before shipment and handle import, labels and delivery.
What is the difference between CrV and CrMo sockets?
Chrome vanadium (CrV) is the usual steel for hand sockets, spanners and ratchets, normally chrome-plated. Chrome molybdenum (CrMo) is tougher and used for impact sockets, usually with a black finish, and is the right choice for use with impact wrenches. Do not sell chromed hand sockets for impact use.
Some supplier sheets say CE or GS. Can we print that?
Not without a basis. Hand tools are generally not covered by a CE directive, and a GS mark requires a certificate from a testing body for that model. We print only the marks for which the manufacturer can show the documents.
When do hand tools sell best?
They sell all year, with extra demand before Christmas for tool sets and in spring for DIY projects. Autumn is the time to plan gift sets and your next spring range and to order samples.
Send us your product list
Links, photos, a planogram or a spreadsheet are enough. You get delivered prices, minimums, lead times and the documents available within 2 working days.
Request a quote
Send a product list, links or photos. We reply with prices delivered to your country, minimum quantities and lead times.
- Reply on working days, usually within a few hours
- Prices delivered to your door, customs and VAT included in the calculation
- Written offer within 2 working days