Wholesale electrical and plumbing fittings
Schuko sockets and switches in glass and plastic frames, power strips with USB-A and USB-C, built-in desk sockets, junction and DIN-rail distribution boxes, lever connectors and cable ties; on the plumbing side, kitchen and basin mixer taps, shower heads and systems, angle and ball valves, bottle traps, sink drain kits and PP-R and PEX fittings. Buy them at the supplier minimum or under your own brand.
These are all-year lines with steady repeat sales in hardware and DIY stores. Plug and socket types, threads and pipe systems differ between countries, so before you order we confirm the exact standard of each model for your market and tell you which documents the manufacturer can show.
41 products in this category
Supplier minimum and an indicative net “from” price on every card. Open a product for ratings, dimensions, threads and branding options.
Schuko Socket 16 A with Glass Frame, 1 to 4 Gang, EU Standard
from €4.31 net
Power Strip with 3 Schuko Sockets, 3 USB-A and 3 USB-C, 2 m Cable
from €19.12 net
IP67 ABS Plastic Junction Box 120 × 120 × 55 mm
from €11.93 net
Reusable Hook and Loop Cable Tie 150 × 12 mm, Nylon
from €0.14 net
Desk Built-in Power Socket: 2 Schuko, USB-C PD 65 W and USB-A
from €40.25 net
19" Surge-Protected Power Strip, 7 Schuko Sockets, 16 A
from €79.95 net
Stainless Steel 304 Kitchen Mixer Tap with Pull-out Spray
from €82.74 net
Tap Aerator Attachment with 3 Spray Modes and Filter, ABS
from €5.75 net
Waterfall Basin Mixer Tap, Brass, Matte Black
from €40.25 net
Hand Shower Head with 3 Modes, PP Filter and Silicone Bristles
from €7.19 net
ABS Shower Head with Silicone Bristles, Black
from €2.82 net
Hand Shower Head with 5 Modes and Filter Cartridge, ABS
from €7.19 net
Stainless Steel 304 Bottle Trap for Basins, Chrome
from €28.18 net
Brass Basin Bottle Trap with Pop-up Waste, Chrome
from €51.72 net
Thermostatic Shower System with 20" Ceiling Head, Rain and Mist
from €644.29 net
Stainless Steel Angle Stop Valve for Hot and Cold Water
from €8.63 net
Brass Press Tee 20 × 16 × 20 mm for PEX Pipes
from €3.45 net
Double Schuko Socket 16 A in Frame, Custom Version (OEM)
from €6.30 net
Schuko Sockets in Tempered Glass Frame, 1 to 5 Gang
from €21.91 net
Earthed Wall Socket 16 A, 250 V with Glass Frame, EU Standard
from €3.54 net
Light Switch with LED Ring, Glass Panel, 1 to 4 Gang
from €7.48 net
Touch Light Switch with Glass Panel, 1 to 3 Gang, EU Standard
from €28.75 net
Power Cord with Euro Plug and C7 Figure-8 Connector, 1.5 m
from €1.01 net
Euro Plug to C7 Power Cable, 1.22 m, Copper Conductors, 250 V
from €1.09 net
IP65 Polycarbonate Distribution Box for DIN Rail, 2 to 24 Ways
from €14.38 net
Hook-and-Loop Cable Ties with Custom Logo, 20–110 mm Wide
from €0.40 net
Hook-and-Loop Straps with Buckle for Cables, Custom Logo
from €1.47 net
Lever Wire Connector, 2 Conductors, 32 A, 250 V
from €0.23 net
Brass Basin Mixer Tap with Twisted Spout, Chrome
from €114.71 net
Stainless Steel Waterfall Basin Mixer, Single Lever
from €11.85 net
PP-R Fusion Pipe Fittings for Water Supply, 20–160 mm, Range
from €0.23 net
PP-R 90° Elbow for Fusion Welding, Water Pipes, 20–110 mm
from €1.29 net
PP-R Elbow with Brass Female BSP Thread, 1/2" to 1"
from €6.61 net
Flanged Steel Ball Valve, PN16 / 150LB, 1/2" to 24"
from €86.25 net
Full-Port Brass Ball Valve, Threaded 1/4" to 2 1/2"
from €5.75 net
Flanged Stainless Steel 304/316 Ball Valve, DN50 to DN300
from €54.63 net
Double Kitchen Sink Drain Kit with Basket Strainers and Flexible Hose
from €14.38 net
Ceiling Shower System with LED Lights and Digital Panel, Brass
from €2,199.38 net
Wall-Mounted Brass Shower Panel with Waterfall Head, Thermostatic
from €258.75 net
SS304 Stainless Steel PEX Fittings (F1960), 1/2" to 1"
from €3.16 net
Brass Press Fittings for PEX and Multilayer Pipes, 16–32 mm
from €3.74 net
Buying guide
Electrical supplies and plumbing fittings look simple on a price list, but they are the products where a wrong standard or a missing document stops a sale. A socket has to match the plug system of the country, a tap has to match the local thread and connection, and a fitting has to match the pipe the installer already uses. We buy these lines factory-direct from partner manufacturers as electrical supplies wholesale and plumbing fittings wholesale for European resellers; we are an importer, not a manufacturer, and what you get from us is the sourcing, the checks and the EU paperwork around each product.
What is in the range
Electrical: 16 A Schuko (type F) sockets in 1 to 5 gang glass frames, double sockets in OEM versions, light switches with LED ring and touch switches with glass panels; power strips with 3 Schuko sockets and USB-A and USB-C ports; 19" surge-protected strips with 7 sockets; built-in furniture sockets with USB-C PD; Euro plug to C7 power cords; IP67 ABS junction boxes and IP65 polycarbonate distribution boxes for DIN rail from 2 to 24 ways; 2-conductor lever connectors rated 32 A; nylon hook-and-loop cable ties, including versions with your logo.
Plumbing: stainless steel 304 and brass mixer taps with ceramic cartridges, pull-out kitchen sprays and waterfall spouts; tap aerators; hand showers with 3 or 5 modes and filter inserts; thermostatic and ceiling shower systems; angle stop valves; full-port brass ball valves from 1/4" to 2 1/2" and flanged steel and stainless ball valves up to DN300; brass and stainless bottle traps; double sink drain kits; PP-R fusion fittings from 20 to 160 mm, PP-R elbows with brass BSP inserts, brass press fittings for PEX and multilayer pipe from 16 to 32 mm and stainless PEX fittings.
What we ask for
For electrical products: socket type (E, F or the combined E/F), rated current and voltage, IP rating, frame and contact materials, wire cross-section range, cable length and conductor size, and for USB strips the total and per-port output. Rated values are the manufacturer's figures; we show them as stated per supplier. We request the EU declaration of conformity under the Low Voltage Directive 2014/35/EU, EMC 2014/30/EU where electronics are inside, and RoHS 2011/65/EU, and check national plug and socket requirements per model. We do not call a socket or strip “certified”: a test report is shown only where it exists, with the laboratory and the date.
For plumbing products: body material and brass grade, finish, cartridge type, thread standard (BSP or NPT, parallel or tapered), pipe diameter and pressure rating (PN), and seal materials. Some countries require approvals for materials in contact with drinking water; we ask the manufacturer what exists for each model and tell you plainly when nothing does. GPSR labelling, with us as the EU importer, applies to every consumer product, and REACH limits apply to PVC and rubber parts.
Mixed orders and installation products
Electrical and plumbing items mix well with hand tools, fasteners and screwdrivers in one order, so a hardware shop can fill a whole aisle with one delivery. Distribution boxes, built-in sockets and shower systems are installation products: packaging and instructions should state that fitting is done by a qualified installer where national rules require it. If you need a socket for type J (Switzerland) or type L (Italy), another frame colour or a fitting that is not in the catalogue, send a drawing or link and we source it through manufacturers.
Private label options
Logo on product and frame
Your brand printed on sockets, switch frames and power strips, laser-marked on tap bodies and valve handles, or woven into cable ties.
Retail packaging
Blister cards, boxes and hang tabs with EAN, ratings, wiring or fitting diagrams and safety notes in your languages.
Colours and specification
Frame colours, tap finishes such as chrome, matt black or brushed steel, cable length and thread type, agreed with the factory and fixed in a pre-production sample.
Checklist before you order
- Confirm the plug and socket type for each country of sale: Schuko (F), French (E), combined E/F, Swiss (J) or Italian (L)
- Ask for the EU declaration of conformity and the list of standards for every electrical model, not one document for the whole series
- Check the thread standard of taps, valves and fittings: BSP and NPT do not mix
- Match PP-R and PEX fittings to the pipe system your customers already use, including press profile and diameter
- Ask which drinking-water approvals exist for each tap or fitting in your market before you list it
- Order samples in autumn and place own-brand orders early: these lines sell all year, but packaging takes time
Frequently asked questions
What is the minimum order for wholesale sockets and power strips?
Supplier minimums in the catalogue run from 1 to 1,000 pieces depending on the model; standard sockets and strips often start at 10 to 20 pieces. Sockets, strips or cable ties with your logo typically start at about 300 pieces per model, and frame colours within one series can often be mixed.
Are you a manufacturer of electrical supplies or plumbing fittings?
No. We are an EU importer. The products are made by partner factories; we check the factory before ordering, inspect the goods before shipment and handle import, labelling and delivery.
Are your sockets and power strips certified?
We do not use that wording. We request the manufacturer's EU declaration of conformity under the Low Voltage, EMC and RoHS rules and check the national socket standard per model. Where a test report exists we name the laboratory and the date; national marks are promised only where a report is available.
Do your taps and fittings meet drinking-water rules?
Rules for materials in contact with drinking water are set nationally and some countries require their own approval. We ask the manufacturer which documents exist for each model and tell you before you order. If an approval is needed and none exists, we say so rather than list the product for that use.
Can we combine electrical, plumbing and tool lines in one order?
Yes. One order can mix sockets, fittings, hand tools, fasteners and storage, each at its own supplier minimum. We consolidate them in Poland and deliver them together with one set of import documents.
Send us your product list
Links, photos, a planogram or a spreadsheet are enough. You get delivered prices, minimums, lead times and the documents available within 2 working days.
Request a quote
Send a product list, links or photos. We reply with prices delivered to your country, minimum quantities and lead times.
- Reply on working days, usually within a few hours
- Prices delivered to your door, customs and VAT included in the calculation
- Written offer within 2 working days